426 Logo – 3D Acrylic Car Badge, Fender Emblem, 1 Pc

426 Logo belongs on the front fender, behind the wheel arch, at roughly door-handle height - the placement engine callouts have used for sixty years. One per side, never two competing badges on the same panel.

Where it goes

On a Charger or Challenger: the front fender behind the wheel arch, the trunk lid, or the lower door below the crease. On a RAM: the tailgate, the bed sides, and the fender flare flats. Avoid textured plastic bumper covers and any panel with an active body line running through the middle of the badge.

Build

Two layers of 3mm cast acrylic, laser cut, hand polished, chamfered on every edge. UV-stable pigment runs through the material, so it does not fade to pastel the way printed vinyl does after a couple of summers.

Color options

The base plate and the text layer are chosen separately, from fifteen solid colors and five mirror finishes each. Mirror is real mirrored acrylic rather than a coating, so it does not scuff off at the edges; it adds $15 per layer.

Installation

3M automotive tape is applied before it ships. Clean the panel with isopropyl, peel, position, press for thirty seconds. No drilling, no fasteners, nothing to rust - and it removes cleanly with fishing line and gentle heat if you ever want the car back to stock.

The quantity discount is calculated per product: two of the same badge takes 10% off, three takes 15%, and four or more takes 20%.

3mm cast acrylic, laser cut and hand polished. Chamfered edges, UV-stable pigment layers.

Pre-applied 3M automotive tape. Clean, peel, position, press for 30 seconds. Alignment template included.

Made to order in 1-3 business days. Free USA shipping over $20.