BRZ (Multicolor) – 3D Acrylic Car Badge, Fender Emblem, 1 Pc

BRZ is the kind of badge that starts a conversation at a fuel stop. Cut from two layers of 3mm cast acrylic, with the text raised off a continuous base plate so it catches light rather than lying flat.

Where it goes

Front fender behind the wheel arch is the standard placement, with the rear quarter and lower door as alternatives. Not the hood scoop - it is curved in two directions and sits directly over the intercooler, which runs hot enough on a turbo car to work the adhesive loose over a summer.

Build

Two layers of 3mm cast acrylic, laser cut, hand polished, chamfered on every edge. UV-stable pigment runs through the material, so it does not fade to pastel the way printed vinyl does after a couple of summers.

Sizes and finishes

Choose your size, then pick a base finish and a text finish independently - fifteen solid colors and five mirror options on each layer. Mirror adds $15 per layer. Dark base with mirror or white text is the combination that reads hardest at distance.

Installation

Pre-applied 3M automotive tape. Clean, peel, position, press for thirty seconds. Because nothing is drilled, the badge comes off later with fishing line and a little heat without leaving a hole in the panel.

The quantity discount is calculated per product: two of the same badge takes 10% off, three takes 15%, and four or more takes 20%.

3mm cast acrylic, laser cut and hand polished. Chamfered edges, UV-stable pigment layers.

Pre-applied 3M automotive tape. Clean, peel, position, press for 30 seconds. Alignment template included.

Made to order in 1-3 business days. Free USA shipping over $20.