TACOMA 2TR-FE 2.7 4I – 3D Acrylic Car Badge, Fender Emblem, 1 Pc

Some cars earn a name. TACOMA 2TR-FE 2.7 4I is laser cut and hand polished from cast acrylic, with the color running through the material - a scrape shows as a scratch rather than stripping the design back to white.

Where it goes

Bedside flat above the rear arch, tailgate clear of the stamped lettering, or the front fender behind the wheel arch. Two surfaces to avoid on a Tacoma or 4Runner: the textured bed rail caps and the plastic lower cladding. Both are rough by design and both are where people try to mount first.

Build

Two layers of 3mm cast acrylic, laser cut, hand polished, chamfered on every edge. UV-stable pigment runs through the material, so it does not fade to pastel the way printed vinyl does after a couple of summers.

Sizes and finishes

Choose your size, then pick a base finish and a text finish independently - fifteen solid colors and five mirror options on each layer. Mirror adds $15 per layer. Dark base with mirror or white text is the combination that reads hardest at distance.

Installation

Pre-applied 3M automotive tape. Clean, peel, position, press for thirty seconds. Because nothing is drilled, the badge comes off later with fishing line and a little heat without leaving a hole in the panel.

The quantity discount is calculated per product: two of the same badge takes 10% off, three takes 15%, and four or more takes 20%.

3mm cast acrylic, laser cut and hand polished. Chamfered edges, UV-stable pigment layers.

Pre-applied 3M automotive tape. Clean, peel, position, press for 30 seconds. Alignment template included.

Made to order in 1-3 business days. Free USA shipping over $20.