Wrangler Gladiator JL – 3D Acrylic Car Badges, Set of 2

Some cars earn a name. Wrangler Gladiator JL is laser cut and hand polished from cast acrylic, with the color running through the material - a scrape shows as a scratch rather than stripping the design back to white.

Mounting on a Jeep

The reliable surfaces are the flat panel on the front fender ahead of the door, the tailgate either side of the spare carrier, and the lower door skins. Do not mount to the textured fender flares - that surface is deliberately rough so adhesive will not key to it, and the tape will let go the first time you wash the car.

Build

Two layers of 3mm cast acrylic, laser cut, hand polished, chamfered on every edge. UV-stable pigment runs through the material, so it does not fade to pastel the way printed vinyl does after a couple of summers.

Color options

The base plate and the text layer are chosen separately, from fifteen solid colors and five mirror finishes each. Mirror is real mirrored acrylic rather than a coating, so it does not scuff off at the edges; it adds $15 per layer.

Installation

Pre-applied 3M automotive tape. Clean, peel, position, press for thirty seconds. Because nothing is drilled, the badge comes off later with fishing line and a little heat without leaving a hole in the panel.

This is a set of two - one for each side. Fender badges look wrong fitted to one side only, which is why these ship as a pair.

3mm cast acrylic, laser cut and hand polished. Chamfered edges, UV-stable pigment layers.

Pre-applied 3M automotive tape. Clean, peel, position, press for 30 seconds. Alignment template included.

Made to order in 1-3 business days. Free USA shipping over $20.