EDITION, Style 2 – 3D Acrylic Car Badge, Fender Emblem, 1 Pc

EDITION is trim lettering cut in 3mm cast acrylic rather than stamped chrome - no pitting, no corrosion creeping under the edge, and it comes off with fishing line and gentle heat if you ever sell the car stock.

Where it goes

Fender, tailgate, trunk lid or lower door - anywhere the surface is smooth, flat and sealed. Avoid textured bumper covers, plastic cladding and rough trim: those surfaces are made rough so adhesive will not key to them. If a panel is crowned, sight along the badge first and check that daylight does not show under the middle.

Build

Two layers of 3mm cast acrylic, laser cut, hand polished, chamfered on every edge. UV-stable pigment runs through the material, so it does not fade to pastel the way printed vinyl does after a couple of summers.

Sizes and finishes

Choose your size, then pick a base finish and a text finish independently - fifteen solid colors and five mirror options on each layer. Mirror adds $15 per layer. Dark base with mirror or white text is the combination that reads hardest at distance.

Installation

Peel, align, press. The 3M automotive tape is pre-applied, so the only thing that matters is a clean, dry surface - wipe the panel with isopropyl first and hold the badge down for a full thirty seconds. No tools and no holes in the paint.

The quantity discount is calculated per product: two of the same badge takes 10% off, three takes 15%, and four or more takes 20%.

3mm cast acrylic, laser cut and hand polished. Chamfered edges, UV-stable pigment layers.

Pre-applied 3M automotive tape. Clean, peel, position, press for 30 seconds. Alignment template included.

Made to order in 1-3 business days. Free USA shipping over $20.